| Power Source: | 105-125VAC, 50/60 Hz. 120/240VAC switchable model optional. |
| Power Consumption: | 430w. |
| Lamp: | ELC 24V 250w. |
| Standard Lens: | 50mm (2") f/1.2, 6-element, coated, with micro-focusing, 160 lines per mm (centre) resolution. |
| Shutter: | 3 blade (2 blade optional). |
| Exciter Lamp: | 4V-0.75A, BRK. |
| Motor: | Induction, with capacitor (plug in module). |
| Film Speed: | 24 FPS, sound speed. |
| Loop Controls: | Lower loop restored automatically. Film Guard automatically shuts off power if upper loop is lost. |
| Control Switch: | Single rotary lockout switch for gate closing, forward, lamp on and rewind. |
| Lamp Brightness: | 850 lumens typical (with optional 2-blade shutter). |
| Rewind: | High-speed in-path or reel-to-reel. No reel or arm change required. |
| Reel Capacity: | 2000 ft. reel standard. |
| Speaker: | Internal 10 x 15cm (4 x 6 in) 8 ohm. Two, 12.5cm (5in) 16 ohm in removable front cover of model SL-1. |
| External Speaker Jack: | 8 ohm 1/4" phone, with 600 ohm unbalanced line, when using 1/4" stereo phone plug. |
| Amplifier: | Solid state (plug in module). 25w RMS. |
| Tone Control: | Treble and bass. |
| Wow & Flutter: | 0.2%. |
| Lamp Switch: | High/Low. |
| Film Threading: | Slot-load. |
| Still Picture: | Manual, with heat filter. |
| CS Lens Holder: | Optional, swing-down style. |
| Public Address: | Built-in microphone jack. |
| Speaker Cord: | 15m (50ft.). |
| Power Cord: | 3m (9ft.). |
| 600 OHM Output: | Unbalanced type. |
| Shipping Weight: | 18Kg (40 lbs). |